Hardware Options Installation; Introduction; Security Bezel Option; Drive Options - HP ProLiant DL180 Gen9 User Manual

Hardware options installation

Introduction

If more than one option is being installed, read the installation instructions for all the hardware options and
identify similar steps to streamline the installation process.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server before
beginning any installation procedure. Improper grounding can cause electrostatic discharge.

Security bezel option

The security bezel helps prevent unauthorized physical access to the front panel components. Install the
security bezel and then lock it with the key provided with the kit. The security bezel is only supported in
servers that are using the quick-release latch rack ears.

Drive options

For a list of drive configurations supported in this server, see "Drive numbering (on page 17)."
The embedded storage controller supports SATA drive installation. For SAS drive installation, install a
Host Bus Adapter or a Smart Array Controller board option
module options" on page 63).
For more information about product features, specifications, options, configurations, and compatibility,
see the product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).
("Installing the storage controller and FBWC
Hardware options installation 41