Table of Contents
Advertisement
139775_R03_GI 535 DV IPI June 2016
2.0 Specifications
Input Rates:
Natural Gas
32,000 BTU/hr. maximum input
11,500 BTU/hr. minimum input
Propane
31,500 BTU/hr. maximum input
11,000 BTU/hr. minimum input
Inlet Pressure:
MIN.
Natural Gas: 5.0 WC (1.00 kPa)
Propane:
11.0 WC (3.00 kPa)
Manifold Pressure:
MIN
Natural Gas: 1.6 WC (0.27 kPa)
Propane:
2.9 WC (0.72 kPa)
Orifice Sizes:
Altitude:
0 - 2000 ft. (0-610 m)
Altitude:
2000 - 4500 ft. (610-1370 m)
Steady State Efficiency:
A.F.U.E. Efficiency:
CSA P4.1-02 Fireplace Efficiency: 66.96%
Electronic Ignition (IPI) or Continuous Pilot (CPI)
Test Standards
This appliance complies with National Safety
standards and is tested and listed by Intertek Testing
Services NA Inc. of Middleton, Wisconsin.
In addition, the Jøtul GI 535 DV IPI gas fireplace
insert has been tested and listed as a direct vent gas
fireplace heater and listed to ANSI z21.88-2014 •
CSA 2.33-2014 "Standard for Vented Gas Fireplace
Heaters", CAN/CSA 2.17-M91 "Standard for Gas-Fired
Appliances for use at High Altitudes", and
CSA P.4.1-15 "Standard for Measuring Annual Fireplace
Efficiency".
4
Jøtul GI 535 DV IPI Direct Vent
Gas Fireplace Insert
Manufactured and Distributed by:
MAX.
7.0 WC (1.74 kPa)
14.0 WC (3.48 kPa)
.
MAX.
3.5 WC (0.95 kPa)
10.0 WC (2.74 kPa)
NG
LP
Left:
1.95 mm
3/64"
Right:
#48
#56
Left:
#48
#56
Right:
#49
#57
NG
LP
70.52%
72.37%
70.03%
72.00%
67.84%
Jøtul North America
Gorham, Maine USA
Jøtul AS
Fredrikstad, Norway
Accessories
• Traditional Red Brick Panel Kit ............................................... #157877
• Brownstone Brick Panel Kit .................................................... #157878
• Reflective Glass Panel Kit .......................................................#157879
• Cast Iron Overlay, Matte Black ............................................. #157899
• Cast Iron Overlay, Brown Majolica Enamel ......................#157900
• Fuel Conversion Kit - NG to LP (included) .......................... #157784
• Fuel Conversion Kit - LP to NG ............................................... #157785
• High Altitude Adjustment Kit - LP ....................................... #157886
• High Altitude Adjustment Kit- NG ....................................... #157887
• Hidden Hanger Bracket Kit ....................................................#157888
Required if no Backer Plate is used
Backer Plate Options
•
All Backer Plates include Hanger Brackets for the Cast
Iron Overlay
Three-sided Backer Plat
• 36" W x 24 1/4"H (91.4 x 61.6 cm) ........................................#157889
• 38"W x 28"H (96.5 x 71.1 cm) ...............................................#157890
• 40" W x 30"H (101.6 x 76.2 cm) ............................................#157891
Three-sided Trimmable Backer Plate
• 46" W x 34" H (116.8 x 86.4 cm) .......................................... #157892
Four-sided Trimmable Backer Plate
• 46" W x 34" H (116.8 x 86.4 cm) .......................................... #157893
e
6 7/16" (16.3 cm)
Hide quick links:
Advertisement
Table of Contents
