Specifications - Jøtul GI 635 DV IPI Installation And Operation Instructions Manual

139712_R00_GI 635 IPI Sept. 2015
Test Standards
This appliance complies with National Safety
standards and is tested and listed by Intertek Testing
Services NA Inc. of Middleton, Wisconsin.
In addition, the Jøtul GI 635 DV IPI gas fireplace
insert has been tested and listed as a direct vent gas
fireplace heater and listed to ANSI z21.88-2014 •
CSA 2.33-2014 "Standard for Vented Gas Fireplace
Heaters", CAN/CGA 2.17-M91 "Standard for Gas-
Fired Appliances for use at High Altitudes", and CSA
P.4.-01.2 "Standard for Measuring Annual Fireplace
Efficiency".

Specifications

Input Rates:
Natural Gas
40,000 BTU/hr. maximum input
10,000 BTU/hr. minimum input
Propane
40,000 BTU/hr. maximum input
8,700 BTU/hr. minimum input
Inlet Pressure:
MIN.
Natural Gas: 4.0 WC (1.00 kPa)
Propane: 12.0 WC (3.00 kPa)
Manifold Pressure:
MIN
Natural Gas: 1.10 WC (0.27 kPa)
Propane: 2.9 WC (0.72 kPa)
Orifice Sizes:
Altitude:
0 - 2000 ft. (0-610 m)
Rear. Left:
Front, Right:
Altitude:
2000 - 4500 ft. (610-1370 m)
Left:
Rear,
Front, Right:
Steady State Efficiency:
A.F.U.E. Efficiency:
CSA P4.1-02 Fireplace Efficiency: 66.44%
Electronic Ignition (IPI) or Continuous Pilot (CPI)
4
Jøtul GI 635 DV IPI Direct Vent
Gas Fireplace Insert
Manufactured and Distributed by:
Jøtul North America
Gorham, Maine USA
Jøtul AS
Fredrikstad, Norway
MAX.
7.0 WC (1.74 kPa)
14.0 WC (3.48 kPa)
. MAX.
3.8 WC (0.95 kPa)
11.0 WC (2.74 kPa
NG LP
2.25 mm 1.40 mm
#47 1.20 mm
2.20 mm 1.35 mm
1.95 mm 1.15 mm
NG LP
70.38% 72.28%
70.30% 72.40%
67.85%
Accessories
Traditional Red Brick Panel Kit ................................................ #157686
Brownstone Brick Panel Kit .......................................................#157798
Reflective Glass Panel Kit .........................................................#157803
Cast Iron Overlay, Matte Black .................................................#157725
Cast Iron Overlay, Brown Majolica Enamel .......................... #157726
Fuel Conversion Kit - NG to LP (included) ..............................#157821
Fuel Conversion Kit - LP to NG .................................................. #157822
High Altitude Adjustment Kit - LP ........................................... #157823
High Altitude Adjustment Kit- NG ..........................................#157824
Hidden Hanger Bracket Kit .......................................................#157802
Required if no Backer Plate is used
Backer Plate Options
All Backer Plates include Hanger Brackets for the Cast
Iron Overlay
e
Three-sided Backer Plat
40" W x 28 1/4"H
42"W x 31"H
46" W x 34"H
Three-sided Trimmable Backer Plate
47 3/4"W x 38"H
Four-sided Timmable Backer Plate
47 3/4" W x 38.63"H
#157799
#157800
#157801
#157826
4" (122 mm)
#157827