Answering A Call Waiting - Panasonic KX-TDA200 User Manual

1.4.4 Answering a Call Waiting

— Answering a call waiting in the PBX
— Answering a call waiting from the telephone company
Answering a call waiting in the PBX
During a conversation, a call waiting tone or voice announcement through the speaker or the handset
occurs when an outside call is received or another extension is letting you know another call is
waiting. To activate this feature, set to "On". (Default: No tone) You can answer the second call by
disconnecting the current call or placing it on hold.
To hold the current call and then talk to the new party
PT/PS
While hearing a tone
HOLD
Press HOLD.
Disregard this step
if you terminate the
current call.
• Depending on the other party's telephone, the "Off-Hook Call Announcement (OHCA)"
and the "Whisper OHCA" functions can be applied. You can talk to the other party through
the speaker and the microphone (OHCA) or you only receive a call announcement through
the handset (Whisper OHCA), while they are having another conversation using the
handset.
• The caller's name or number is displayed for five seconds in ten second intervals before
answering a call.
Customising Your Phone
• 3.1.2 Initial Settings—Call Waiting Tone Type Selection
Determine the tone depending on the second party, either an outside call or an
extension.
Default
Special Tones
User Manual
(CO)
OR
INTERCOM
Press CO or INTERCOM.
Disregard this step
if both parties are
extensions.
PT/SLT/PS
While hearing a tone
TRANSFER
OR
OR
Press TRANSFER or hookswitch
and then enter 50.
Disregard this step if you
terminate the current call.
15 s
5 s
OR
5 0
On-hook.
Operation
Off-hook.
59