Panasonic KX-TDA200 User Manual page 17

CONF (Conference) Button (
Used to establish a three party
conversation.
TONE Button:
Used to change the dialling mode
temporarily to tone. (Pulse to Tone
Conversion)
FLASH / RCL Button (
Used to disconnect a current call and
make another call. This is not available
for an ISDN line.
HOLD Button (
Used to place a call on hold.
Customising Buttons
If the term is in parentheses like (Account) in this section, it means a flexible button has been made
into an "Account" button. To perform the following functions, refer to each operation.
Direct Station Used to access the extension.
Selection It is also possible to be changed
(DSS) to the other function button.
Loop-CO Used to access an idle outside
(L-CO) line for making outside calls.
Incoming outside calls from any
outside line arrive at this button.
Single-CO Used to access a specified
(S-CO) outside line for making or
receiving outside calls.
One-touch Used to access to a desired
Dialling party or system feature.
Account Used to enter an account code. Toll Change
ISDN Service Used to access an ISDN line
Access
service.
Call Park
Used to park or retrieve a call in
a pre-set parking area.
Save Used to store a dialled phone
number and redial.
User Manual
):
):
):
Group Direct
Station
Selection
(G-DSS)
Group-CO
(G-CO)
Terminate
Message
Group
Directory
Number (G-DN)
Conference
Call
Forwarding/Do
Not Disturb
(FWD/DND)
WAVESEARCH Button:
Used to search the best Cell Station on
idle status. (Wave Search)
EDIT MODE Button:
Used to select a mode to edit on
Directories (except the PBX Extension
Dialling Directory) or in pre-dialling.
PROGRAM Button:
Used to enter the programming mode.
Flexible CO Button :
Used to assign or edit the Flexible CO
F1 F2 F3
buttons.
Used to access an assigned
incoming group.
Used to access an idle outside
line in a specified group for
making outside calls. Incoming
calls from outside lines in the
assigned group arrive at this
button.
Used to disconnect the current
call and originate another call
without hanging up.
Used to inform the called party
of a message waiting.
Used to change the toll
restriction level of the other
extension users temporarily.
Used to access a specified
incoming group for making or
receiving calls.
Used to establish a multiple
conversation.
Used to forward all calls to their
specified destination.
Operation
17