Answering Call Waiting In The Pbx - Panasonic KX-NS1000 Operating Manual

One of the following notification methods can be assigned for each extension, depending on the type of
telephone being used. (Default: Call Waiting Tone)
•
Call Waiting Tone: A call waiting tone is heard through the built-in speaker of PT or handset of SLT (®
1.3.13 Call Waiting Tone).
•
Off-hook Call Announcement (OHCA): The caller's voice is heard through the built-in speaker (®
1.3.46 OHCA (Off-hook Call Announcement)).
•
Whisper OHCA: The caller's voice is heard through the handset (® 1.3.76 Whisper OHCA).

Answering Call Waiting in the PBX

During a conversation, a call waiting tone or voice announcement through the speaker or the handset occurs
when an outside call has been received or another extension is letting you know a call is waiting. You must
activate this feature to use it. (Default: Call Waiting Tone)
You can answer the second call by disconnecting (1) or holding (2) the current call.
1. To disconnect the current call and then talk to the new party
PT/SLT/PS/KX-UT series
While hearing a tone
On-hook.
2. To hold the current call and then talk to the new party
PT/PS
While hearing a tone
Press HOLD.
Disregard this step if both
parties are extensions.
Document Version 2013-04
Talk to the
Off-hook.
new party.
(CO)
OR
(ICD Group)
OR
(PDN)
OR
(SDN)
OR
Press CO, ICD Group,
PDN, SDN, or INTERCOM.
1.3.12 CALL WAITING FEATURES
Talk to the
new party.
Operating Manual 55