Initial Settings - Panasonic KX-TDA200 User Manual

Customising Your Phone & System

3.1.2 Initial Settings

The original settings are shown in bold letters in the shaded boxes. Find and mark your desired
selections for programming.
• If nothing is entered within one minute in the programming mode, the mode returns to the
normal status.
• To exit the mode at any time, lift the handset.
To enter the programme mode
PROGRAM
OR
PAUSE
Press PROGRAM
or PAUSE.
Item
Your extension number
display
Which line do you prefer to
seize when you go off-hook
to make calls?
(Preferred Line Assignment
– Outgoing)
Which line do you prefer to
seize when you go off-hook
to receive calls?
(Preferred Line Assignment
– Incoming)
130
To programme
programming
input
Follow Press
programming ENTER.
input.
Programming
Input
It shows PBX number, slot number and port number
<example>
0 0
0 1
2
0 2
2
parameter
Enter
parameter.
Selection & Parameter
EXT105:10308
PBX no. Port no.
Slot no.
0
1
(01–24)
CO button no.
OR
(CO)
3
0
1
(01–24)
CO button no.
OR
(CO)
To exit
PROGRAM
OR
PAUSE
Press Press PROGRAM
ENTER.
or PAUSE.
No line
An idle outside line
A CO/GDN button
The Intercom line
No line
A first ringing line
A assigned outside button
User Manual