Panasonic KX-TDA200 User Manual page 14

Operation
When You Use a Panasonic Proprietary Telephone/Portable Station
If you use a Panasonic proprietary telephone and the Console, they may have some of the useful
function buttons described below. These buttons make operations simple. The illustrations may differ
from the buttons on your telephone.
Proprietary Telephone Buttons
CO:
Used to make or receive an outside
(CO) call. A Loop-CO button supports all
lines. Pressing this button seizes an
idle outside line automatically. (Button
assignment is required.)
Also used as the desired function
buttons. (Button assignment is
required.)
(Only the CO "number" (e.g. 1, 2) may
be shown on some telephones.)
AUTO DIAL/STORE:
AUTO DIAL
Used for System Speed Dialling or
storing programme changes.
STORE
REDIAL:
Used to redial.
REDIAL
INTERCOM:
Used to make or receive an intercom
call.
INTERCOM
MONITOR:
Used for hands-free dialling. You can
MONITOR
monitor the party's voice hands-free.
14
SP-PHONE:
Used for the hands-free operation.
SP-PHONE
PAUSE:
Used to insert a pause during dialling.
PAUSE
Used as the PROGRAM button if it is
not equipped.
MESSAGE:
MESSAGE
Used to leave a message waiting
indication or call back the party who left
the message waiting indication.
Soft:
Used to perform a function or operation
appearing on the bottom line of the
display.
AUTO ANSWER/MUTE:
AUTO ANSWER
Used to receive an incoming call in the
hands-free mode or mute the
MUTE
microphone during a conversation.
User Manual