Display Option
with the Handset
Selecting the Talk Mode Display
You can select whether to display the length of the call or the dialled telephone number while in the
talk mode. The factory preset is set to show the length of the call.
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
1
Press
.
2
Press
or
"Setting Handset", then press
3
Press
or
"Display Option", then press
4
Press
or
"Talk Display", then press
"Talk Time": Length of the call
"Phone No.": Dialled phone number
The arrow points to the current setting.
5
Press
or
or "Phone No.", then press
A beep sounds.
The display will return to "Talk Display".
To return to the standby mode, press
or wait for 60 seconds.
You can exit the programming mode any time
by pressing
60
until the arrow points to
until the arrow points to
until the arrow points to
to select "Talk Time"
.
.
During a conversation, the display will be as
follows.
"Talk Time" is selected.
.
(Ex. 1 hour, 30 minutes, 40 seconds.)
01-30-40
.
"Phone No." is selected.
.
(Ex. 123-456-7890)
1234567890