Table of Contents
Advertisement
Ringer Option
In "Ringer Option" menu, Selecting the ringer type for paging (p. 25), To select the ringer
type for private category (p. 33), and Selecting the ringer type for time alarm (p. 54) are also
available.
with the Handset
Selecting the Handset Ringer Volume/Type
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
To select the handset ringer
volume
7 levels are available. The lowest level is 1. The
highest level is 6. The factory preset is 3. When
set to OFF, the handset will not ring.
1
Press
.
2
Press
or
"Setting Handset", then press
3
Press
or
to "Ringer Option", then press
4
Press
or
to "Ringer Volume", then press
The arrow points to the current setting.
5
Press
or
to select the desired level.
Each time you press
selected volume is displayed and rings.
Level 6 is selected.
Ex.
R i n g e r V o l u m e
1 2 3 4 5 6
LOW
To set to OFF, erase " " by pressing
until "OFF" is displayed.
6
Press
.
A beep sounds.
The display will return to "Ringer
Volume". To return to the standby mode,
press
or wait for 60 seconds.
When set to OFF, "Ring Off" will be
displayed.
until the arrow points to
.
until the arrow points
until the arrow points
or
, the
HIGH
To select the handset ringer
type for external/internal call
You can select one of 20 ringer types for each
external and internal call. The factory preset is
type 1.
1
Follow steps 1 to 3 of To select the
handset ringer volume.
2
Press
or
Type" for external call.
OR
Press
or
.
Type" for internal call.
3
Press
.
.
The arrow points to the current setting.
"Ext Ring Type" is selected.
Ex.
E x t R i n g T y p e
H R i n g e r 1
R i n g e r 2
4
Press
or
type.
Each time you press a button, the selected
ringer type sounds.
5
Press
A beep sounds.
The display will return to step 2. To return
to the standby mode, press
for 60 seconds.
You can exit the programming mode any time
by pressing
to select "Ext Ring
to select "Int Ring
to select the desired
.
.
or wait
55
Advertisement
Table of Contents
