Panasonic KX-FT33HK Operating Instructions Manual page 49

Setting the ring pattern detection
1
Press MENU .
Display:
2
Press , then 3 1
3
Press START/COPY/SET
4
Press or
If this feature is not required, select "OFF".
5 Press
START/COPY/SET
The unit will print an information list.
6
Press MENU .
How the unit will answer in each receive mode
TEL mode: You have to answer all calls manually.
If a fax calling tone (slow beep) is heard or no sound is heard, press
to receive documents.
TEL/FAX mode: When a single bell is detected, the unit will automatically answer the call without ringing
and activate the fax function.
When a double bell is received, the unit will ring until you answer the call.
FAX ONLY mode: The unit will answer all calls automatically and activate the fax function.
EXT.TAM mode: When a single bell is detected, the unit will automatically answer the call and activate the
fax function.
When a double bell is received;
—if it is a voice call, the external telephone answering machine will record the voice
message.
—if it is a fax call, the unit will receive documents.
Note:
In the FAX ONLY mode, the unit automatically answers a single bell call after the second ring. To change
the number of rings, change the FAX ONLY mode ring count (page 41) after setting the ring pattern.
1.SYSTEM SET UP
.
RING DETECTION
.
MODE=OFF
to select "ON".
MODE=ON
.
PRINTING
SETUP ITEM [
Dial keypad
1 2 3
4 5 6
7 8 9
0
]
Receiving Faxes
MENU
START/COPY/SET
START/COPY/SET
– 49 –