Pc Monitor Mode; Connecting A Pc; Selecting The Channel Position For The Pc; Settings For The Pc - Grundig 02 GBH 4719 Manual

02Vision 2 19-2930T DVD_en:Layout 1
PC SETUP
Auto Adjust
Horizontal Position
GGGGGGGG
Vertical Position GGGGGGGG
Size GGGGGGGGGG
Phase GGGGGGGGG
Select
52
04.09.2009

PC MONITOR MODE

Connecting a PC

1 Connect the socket »PC-IN« on the television to the correspon-
ding socket on the PC using a VGA cable.
2
Connect the socket
corresponding socket on the PC using a cinch cable (audio
signal).
Note:
Adjust your PC to the monitor (for example, picture resolution
1280 x 768, picture frequency 60 Hz).

Selecting the channel position for the PC

1 Press »
»OK« to confirm.

Settings for the PC

1 Open the menu with »MENU«.
– The »PICTURE« menu is displayed.
2 Select the »PC SETUP« menu with »
»OK«.
3 Select the function or setting you want with »
r
» « or »
45 – Options:
45
»Auto Adjust«
0
»Horizontal Position«
50
»Vertical Position«
»Size«
Back
»Phase«
Exit
4 Press »MENU« to finish the settings.
9:03 Uhr
AUDIO« on the television to the
»PC
«, select the »PC« channel with »
e
« to execute it.
For automatic PC configuration;
Adjust the picture position horizon-
tally;
Adjust the picture position vertically;
Set the cycle frequency;
Remove horizontal flicker, blurring
and horizontal lines.
Seite 52
----------------------------------------------------------
q w
« or » « and press
r e
« or » « and confirm with
q w
« or » « and press