02Vision 2 19-2930T DVD_en:Layout 1
CHANNEL SETUP
Auto Tuning
Digital Manual Tuning
Analogue Manual Tuning
Programme Table
Signal Information
CA - Module
Removed
Active Antenna Power
On
Select
04.09.2009
SPECIAL SETTINGS
Changing stored channels for analogue stations
If channels were stored with the automatic channel search during
the tuning of the television channels, you can delete them. You can
also store stations in a different preset, change or enter the name of
a stations as well as skip channels.
Select channel lists
1
Open the menu with »MENU«.
– The »PICTURE« menu is displayed.
s
2
Select the »CHANNEL SETUP« menu with »
s
firm with »OK«.
s
s
3
Select »Programme Table« with »
confirm.
Note:
Back
Additional operations are explained in the following sections.
Exit
Deleting channels
1
In the »Programme Table« menu, press »
channel to be deleted and press »
2
Press »
§
Note:
Press »
8!
Sorting television channels
1
In the »Programme Table« menu, press »
channel to be moved.
2
Press »
§
3
Enter the new presets with one, two or three digits using »1...0«.
4
Press »OK« to confirm the entry.
Notes:
To sort the other television channels, repeat steps
Entering the channel names
(maximum of 5 characters)
1
In the »Programme Table« menu, select the desired channel with
q
w
»
«, »
«, »
2
Highlight the channel with »
3
Select letters or numbers with »
position with »
4
Store the channel name with »OK«.
Note:
To enter additional channel names, repeat steps
9:03 Uhr
------------------------------------------------------------------
q
« or »
7
« (green) to confirm the deletion.
« (red) to delete all the channels.
« (green) to highlight the channel.
r
e
« or »
«.
« (red).
8!
q
« or »
r
e
« or »
« and repeat.
Seite 57
r
e
« or »
« and con-
w
« and press »OK« to
q
w
« or »
« to select the
« (yellow) to confirm.
q
w
« or »
« to select the
1
to 4.
w
«, move to the next
1
to 4.
57