Connecting The Antenna And The Mains Cable - Grundig 02 GBH 4719 Manual

02Vision 2 19-2930T DVD_en:Layout 1
3
8
04.09.2009
CONNECTION/PREPARATION

Connecting the antenna and the mains cable

2
1 Plug the cable of the rooftop or indoor antenna (passive or
active indoor antenna with its own power supply for digital tele-
vision stations) into the antenna socket
vision set;
or
plug the rooftop antenna cable (for analogue television stations)
into the »ANT IN« socket on the television.
Note:
When connecting an indoor antenna you may have to try it out
at different positions until you get the best reception.
2 Plug the mains cable supplied into the
the television.
3 Plug the mains cable into the wall socket.
Note:
As well as the 230 V mains supply, you can also operate the te-
levision with a standard 12 V power supply unit (4 amps). Con-
nect the power supply unit into the
socket.
Note:
Only plug the device into the mains socket after you have
connected the external devices and the antenna.
Only connect the television using the power cord supplied to a
suitable earthed safety socket.
Do not use an adapter plug or extension lead which does not
meet the applicable safety standards. Do not tamper with the
power cord.
9:02 Uhr Seite 8
1
»ANT
»AC IN« mains socket of
»DC IN« socket and the wall
----------------------
IN« on the tele -