Setup (Base Unit)
Setting your logo
The logo can be your company, division or name.
Press p.
1
Display:
Press ( or ) until the following is
2
displayed.
Press w.
3
Enter your logo, up to 30 characters, using
4
the dial keypad. See the next page for details.
Example: "Bill"
1. Press 2 2 times.
2. Press 4 6 times.
3. Press 5 6 times.
4. Press ) to move the cursor to the next
space and press 5 6 times.
Press w.
5
The next feature will be displayed.
Press p.
6
18
SYSTEM SET UP
I H
PRESS NAVI.[
]
YOUR LOGO
PRESS SET
LOGO=
AAAAAAAAA
Cursor
LOGO=B
LOGO=Bi
LOGO=Bil
LOGO=Bill
YOUR FAX NO.
PRESS SET
Display
MUTE
(Insert)
RECALL
(Hyphen)
Note:
You can enter your logo by pressing + or
- (see the next page) in step 4. In this
case, press ) to move the cursor.
To correct a mistake
Press ( or ) to move the cursor to the
incorrect character, and make the correction.
To delete a character
Move the cursor to the character you want to
delete and press { (Delete).
To insert a character
1. Press ( or ) to move the cursor to the
position to the right of where you want to
insert the character.
2. Press r (Insert) to insert a space and
enter the character.
STOP
(Delete)
MENU
SET