Battery Charge - Panasonic KX-FC175AL Operating Instructions Manual

Setup (Handset)
Battery charge)
Lay the handset in the cradle of the base unit for
about 6 hours before initial use.
A beep will sound, and the following will be
displayed for an instant on the base unit.
Display:
If the base unit is in use, a beep may not sound
and the above display may not be shown.
While charging, the battery strength mark (see
below) will be shown on the handset display.
Note:
Clean the handset and the base unit charge
contacts with a dry cloth once a month, or the
battery may not charge properly.
The battery cannot be overcharged.
Battery strength
You can check the battery strength on the
handset display while the handset is in use, or for
about 5 seconds after using the handset.
Handset display
(flashing)
Battery life
If your Panasonic battery is fully charged;
— the battery life will last up to 4.5 hours while in
use (in conversation) near the base unit within
about 3 m.
— the battery life will last up to 3.5 hours while in
use (in conversation) away from the base unit.
— it will last for up to about 11 days while not in
use (off the base unit).
Battery life may vary depending on usage
conditions and ambient temperature.
22
CHARGING
!
The display will show
the date and time.
Battery strength
Fully charged
Medium
Low
Needs to be recharged.
Charge
contacts
Base unit
display
Handset
display
Recharge
Recharge the battery when:
— the handset beeps intermittently while it is in
use, or
— the following is shown and "
the handset display.
Display:
Recharge the handset battery for more than 15
minutes, or the display will continue showing the
above indication.
Automatic security code setting
Whenever you place the handset on the base
unit, the unit will automatically select one of a
million security codes. These codes help to avoid
unauthorised use of your telephone line by
another cordless telephone.
" flashes on
Recharge battery