Other Features; Job Memory; Double Exposure - Panasonic DP-3530 Operating Instructions Manual

Making Copies

Other Features

■ Job Memory

Five Copy Jobs can be stored in Memory
(M1 to M5) for recall at a later time.
Set up the copy job
to be stored.
NOTE:
When the M5 Key is used, the Double
Exposure Mode should be set to "Off"
in the Copier Settings "19 Double
Exposure". (See page 67)

■ Double Exposure

From 2-Sided originals to 1-Sided 2 in 1
copies (side-by-side image). ∗
Original Size:
Maximum Invoice
ex. Invoice
NOTE:
A
A
B
B
C
C
Front Side
Image
NOTE:
● When opening the ADF.
● An incorrect position detection of the original may occur
when a strong light shines on the glass during this mode.
● An incorrect exposure may occur when there is a black
line at the edge of the original or an image which the
machine interprets as a black pattern in this mode.
● The final copy may be affected if colored background
original(s) do not have a white edge or if it is less than 2
mm wide.
● JOB MEMORY mode will not be deleted even if the power switches are turned Off.
NOTE
● When storing a new job into a programmed memory location, the previously stored job will be
● M1, M2 can use as manual skyshot mode by setting the user function mode.
60
To store a job in memory
1
1
1
Copy Size: Letter-R
Original Guide
D
E
F
Back Side
Image
5
overwritten and erased.
2
• Front Side of Original
• Original Size:
Free, maximum Invoice size
• Opening the ADF
• Fit original to the Original
Guide.
6
Back Side
of Original
∗
1 When selecting the Double Exposure, it will
be displayed as "2 in 1" at Job Settings, and
"N in 1" of Function Select Key will also be
displayed.
∗
2 Double Exposure function set by M5 key is
unable to store with other Job Memory.
2
M1, M2, M3, M4, M5
(See NOTE)
∗
2