Skyshot Mode; Concurrent Copying; Energy Saver (Power Saver Mode, Sleep/Shutdown Mode) - Panasonic DP-3530 Operating Instructions Manual

Making Copies
Other Features

■ Skyshot Mode

Skyshot allows copying a manuscript without generating dark borders even if the Platen Cover or ADF is opened.
Two types of Skyshot modes can be selected:
1) Digital Skyshot Mode : The scanning area (size) is not pre-determined.
2) Manual Skyshot Mode : The scanning area (size) is pre-registered into memory (M1 and M2) in advance.
Digital Skyshot Mode
The Digital Skyshot has 2 modes
( or ).
copy
The default setting of Digital Skyshot Mode is
"Freeshp".
Before using this mode, select each setting by
using the Function setting.
No
Freeshp (Free shape) : Copy is made with a slant.
Parallel
(See page 67)

■ Concurrent Copying

The next copy job can be reserved even if the
current copy job is not completed.
(Requires the optional Hard Disk Drive (See page
81) to be installed)
1st job
Reserve
2nd job
■ Energy Saver (Power Save Mode, Sleep/Shutdown Mode)
These modes save power while the copier is not in use.
1
Power Save Mode
Indicator
Flash: Power Save Mode
Light: Sleep/Shutdown Mode
NOTE
62
: None
: Copy is made in a straight line.
(within 5 degrees)
1st job
Copy
2nd job
Sleep/Shutdown Mode ∗
Automatically enters the Sleep/
or
Shutdown Mode after 15 minutes
from the last copy job.
● Power Consumption and Warm Up Time while in the Power Save
Enter
Mode or Sleep/Shutdown Mode, refer to page 90.
● The machine will not go into Sleep/Shutdown Mode when the Weekly
Timer is selected.
∗
Sleep Mode/Shutdown Mode and timer setup is performed in the key operator mode.
(See page 70)
● An incorrect exposure may occur when there is a black line at the edge of the original or an
image which the copier interprets as a black pattern in the skyshot mode.
1 2
Set original on
Platen Glass
copy
1st job
1
or
To clear
Number of Copies
(Max. 999)
2
Select Function
2