Making Copies; Basic Menu; Copying The Same Size Originals (1:1); Positioning Original(S) - Panasonic DP-3530 Operating Instructions Manual

Making Copies

Basic Menu

■ Copying the Same Size Originals (1:1)

Copy size is automatically selected.
100%

■ Positioning Original(s)

On the i-ADF
Note 1) Once after setting originals , pressing Start button, do not press originals as it may cause original jam.
Note 2) When originals with clipped or stapled, take off clips or staples, then set originals neat.

■ Using the ADF

Originals that cannot be used
● Post Cards, Drawing Papers, Transparencies,
Labelling Papers, Heavyweight Papers, Thin Art
Papers, Film Thermal Papers
Inappropriate Originals
● Paper with a smooth surface such as glossy and
coated papers
● Originals with a Lead Edge that is ripped, creased,
folded, punched, or glued.
● Mixed width size Originals (except a combination of
Ledger and Letter)
● Paste-ups
● Pressure sensitive or carbon backed papers
● Paper with excessive curl
● Stapled originals
● Freshly printed copies from a laser printer
● Originals with fresh White-Out (Liquid paper
correction fluid)
● During the copy operation and after making copies, the fan motor may start spinning. This is a
NOTE
34
On the Platen
normal operation and is used to cool down the copier.
1
or
If set in other
function mode
ADF
ADF Tray
Original Guides
Adjust to the original's width
2
If original size
is not detected
Set the originals up to the
upper limit indicator/Guide.
Upper Limit
Indicator
Upper Limit Guide