Multi-Size Feeding; Job Build And Sadf Mode - Panasonic DP-3530 Operating Instructions Manual

Making Copies
2-Sided/Original

■ Multi-Size Feeding

Use this function when copying mixed Ledger/Letter
size originals using the ADF. Original size can be
detected automatically then can be copied full size
(1:1) or same size.
Combination of Multi-Size Feeding
Originals
Full Size
Legal Legal
Letter-R Letter-R
Ledger Ledger
Letter Letter

■ Job Build and SADF Mode

Special originals (like thin paper, etc.) can be fed
from the ADF Tray and copied continuously using
the Job Build and SADF Mode.
If the Job Build and SADF buttons are not shown
on the Touch Panel display, the Job Build and
SADF Modes must be enabled in the copier
function settings, please consult with the key
operator. (See page 74)
Example: To make 5 sets of sorted copies of
100 sheets of originals. (Letter size)
70
1
Originals: 70 sheets <1st scan>
100
71
st
1 and 2
are combined into one job.
Originals: Remaining 30 sheets <2nd scan>
● Multi-Size Feeding Function cannot be combined with another 2-Sided/Original
NOTE
● Job Build and SADF function cannot be combined with 2
46
Copies
Reduction Enlargement
Letter-R/Invoice Ledger
Letter-R/Invoice Ledger
Letter/Letter-R
—
Letter/Letter-R
100
1
nd
Scanned Data
5 sets of 100 sheets
sorted copies are printed
Function.
Copy
1
1
Place one Original
at a Time or up to 70
sheets (20 lb)
1
Place the first 70 sheets
of originals on the ADF
Tray.
2
Reduction/
Enlargement
only
2
Reduction/
Enlargement
only
2
Copy
1 and 2 2.