Touch Panel Display - Panasonic DP-3530 Operating Instructions Manual

Before Starting

Touch Panel Display

27
26
25
24
23
● Use only gentle finger pressure to activate the Touch Panel Display. DO NOT USE SHARP
NOTE
● Touch Panel Display Brightness Adjustment:
32
1 2 3
22
Job Status Indicator
Ex.: Copying 3 sets.
The Indicator displays the progress of a job task as follows:
0/3 → 1/3 → 2/3 → 3/3
OBJECTS such as pens, fingernails etc., as this may damage the panel.
To adjust the brightness of the Touch Panel display, press and while holding down the "C"
(CLEAR) key, keep pressing the "ORIGINAL SIZE/LEDGER" or the "COPY SIZE/LEDGER"
keys until the desired brightness is achieved.
ORIGINAL SIZE/LEDGER : Dimmer
COPY SIZE/LEDGER : Brighter
DP-6030
6 7
4 5 8 9 10
21 20
When the Department Counter function is set up, the departmental
Identification Code input screen is displayed on the Touch Panel
Display. A registered departmental Identification Code (4-digit) is
required to gain access to each secured function, or the secured
Copy/Fax/Scanner function(s) cannot be used. Please consult
with the key operator regarding the departmental Identification
Code(s) for the desired function.
14
11 12 13
19
15
16
17
18