Panasonic DP-3530 Operating Instructions Manual page 85

2
Select "Auto Registration".
Set the PC and Key Name to be saved on the machine.
When the DP-3530/4530/6030 is installed on a different subnet
mask ∗ of the network (LAN), Select "Add Device" then, register the
machine by following the steps below.
Click OK.
3
When the DP-3530/4530/6030 is installed on a different subnet mask ∗ ∗ ∗ ∗ ∗ of the network.
3
Select a destination (PC) ∗
∗
A destination will be indicated
"ROUTING MENU" : refer to optional
Document Distribution System (DA-WR10).
NOTE:
If the Panasonic Communication Utility software
is not started on your PC, a destination is not
shown on the Touch Panel Display.
6
Select a file
When "CUSTOM" is selected.
format
PC Screen
9
Input the machine's Device Name and IP Address.
Click OK.
Returns to the screen on the left.
Click OK.
3
Click "Add".
Returns to the Scanner Configuration screen above.
When
"DATE/TIME"
8
is selected.
10
3
Right-click on the Panasonic
Communications Utility icon, and select
one of the Scanner Reception
Notifications (Pop up Display or Icon
Display).
NOTE:
∗
Consult your system administrator for
detail of your subnet mask.
4
Select a Mode if required
Resolution ∗
Exposure
∗
150dpi: Text mode only.
Original mode
7
File name
(Max. 20 characters)
Ex.: Jack
5
2-Sided Original
Thin Original
8
Refer to PDMS Operating
Instructions on the
CD-ROM.
85