Table of Contents
Advertisement
Transporting the projector
It is recommended that you ship the projector with its original packing or equivalent.
Lamp information
Getting to know the lamp hour
When the projector is in operation, the duration (in hours) of lamp usage is automatically
calculated by the built-in timer.
To obtain the lamp hour information:
1.
Press MENU and then use the arrow keys (▲/▼/◄/►) to go to Information or
Settings > Information.
2.
The Equivalent Lamp Hour information displays.
3.
Press BACK to exit.
Extending lamp life
The projection lamp is a consumable item. To keep the lamp life as long as possible, you
can do the following settings via the Lamp Power OSD menu.
Setting Lamp Power
Setting the projector in Economic or SmartEco mode also extends the lamp life.
Lamp mode
Normal
Economic
SmartEco
Using Economic mode reduces system noise and power consumption by 30%. Using
SmartEco mode reduces system noise and lamp power consumption by up to 70%. If the
Economic or SmartEco mode is selected, the light output will be reduced and result in
darker projected pictures.
1.
Go to Picture > Lamp Power.
2.
Press OK to display the Lamp Power window
3.
Press ◄/► to move to your desired mode, and press OK.
4.
When done, press BACK to save your changes and exit.
Setting Auto Power Off
This function allows the projector to turn off automatically if no input source is detected
after a set period of time.
1.
Go to System Setup : Basic > Auto Off.
2.
Press ◄/► to select a time period. If the preset time lengths are not suitable for
your presentation, select Disable, and the projector will not automatically shut
down in a certain time period.
3.
When done, press BACK to save your changes and exit.
56
Maintenance
Description
100% lamp brightness
Saves 30% lamp power consumption
Saves up to 70% lamp power consumption depending on the content
brightness level
Advertisement
Table of Contents
