Table of Contents
Advertisement
Installing the new lens
Remove both end caps from the lens.
Removal of the plastic body cap before inserting a lens for the first time.
1.
Align the flange and correctly
position at the 11 o'clock
position as shown in the
picture.
Flange must be positioned at the 11
o'clock position, direction as shown
in the picture.
2.
Rotate the lens clockwise until you feel it click
into place.
Adjusting projected image position using lens shift
Suggest to loosen the screw before lens shift adjustment and tighten up after finished
adjustment.
The Lens Shift function can be used to adjust the position of the projected image either
horizontally or vertically within the range detailed below.
18
Positioning your projector
30°
Flange
Vertical lens shift
lever
Screw for ensuring
the lens position
Horizontal lens
shift lever
Advertisement
Table of Contents
