Check Lamp Hour Information - BenQ W700 Product Service Manual

Check Lamp hour information

Timing of replacing the Lamp
When the Lamp indicator lights up red or a message appears suggesting it is
time to replace the lamp, please install a new lamp or consult your dealer. An
old lamp may cause a malfunction in the projector and in some instances the
lamp may explode.
W700
Status Message
The lamp has been in operation for 5500
hours.
Install a new lamp for optimal performance.
If the projector is normally run whit
Economic selected, you may continue to
operate the projector until the 3950 hour
lamp warning appears.
The lamp has been in operation for 5950
hours. A new lamp should be fitted to avoid
the inconvenience when the projector runs
out of lamp time.
The lamp has been in operation for 6000
hours.
It is strongly recommended that you replace
the lamp at this age. The lamp is a
consumable item. The lamp brightness
diminishes with use. This is normal lamp
behavior. You can replace the lamp
whenever you notice that the brightness
level has significantly diminished. If the lamp
is out replaced beforehand, it must be
replaced after 4000 hours usage.
MUST
The lamp be replaced before the
projector will operate normally.
55