Connecting video source devices
You need only connect the projector to a video source device using just one of the
connecting methods, however each provides a different level of video quality. The method
you choose will most likely depend upon the availability of matching terminals on both the
projector and the video source device as described below:
Terminal
name
HDMI-1
HDMI-2/MHL
COMPONENT
VIDEO
If the selected video image is not displayed after the projector is turned on and the correct video
source has been selected, check that the video source device is turned on and operating
correctly. Also check that the signal cables have been connected correctly.
Terminal
Reference
appearance
•
•
"Component Video
connection" on page 26
"Video connection" on page 27
"HDMI connection" on
page 23
"Smart devices connection"
on page 24
Picture quality
Best
Better
Normal
Connection
29