Table of Contents
Advertisement
Shutting down the projector
1.
To turn the projector off, press
remote control to turn projector off directly. Or
you can press
a warning message appears.
Press
2.
Once the cooling process finishes, the POWER
indicator light is a steady orange and fans stop.
3.
Disconnect the power cord from the wall socket if the projector will not be used in
an extended period of time.
•
To protect the lamp, the projector will not respond to any commands during the cooling
process.
•
To shorten the cooling time, you can also activate the Quick Cooling function. See
Cooling" on page 48
•
If the projector is not properly shut down, to protect the lamp, when you attempt to re-start
the projector, the fans will run for a few minutes to cool down. Press POWER again to start
the projector after the fans stop and the POWER indicator light turns orange.
•
Lamp life results will vary depending on environmental conditions, and usage.
POWER on the projector and
POWER again.
for details.
on the
"Quick
Operation
51
Advertisement
Table of Contents
