System Setup : Advanced Menu - BenQ HT6050 User Manual

System Setup : Advanced menu

Submenu
Lamp Settings
HDMI Settings
Baud Rate
Test Pattern
Closed Caption
Quick Cooling
48 Operation
Functions and Descriptions
• Reset Lamp Timer
Activates this function only after a new lamp is installed. When you select Reset,
a "Reset Successfully" message displays to notify that the lamp time has been
reset to "0".
• Lamp Timer
The Lamp Timer function displays the portion of time used by each operation
mode: Normal, Eco, SmartEco mode, and the Equivalent Lamp Hour meter.
• HDMI Range
Selects an input source type for the HDMI signal. You can also manually select the
source type. The different source types carry different standards for the
brightness level.
HDMI Range is only available when the HDMI signal is selected.
• CEC
Enables or disables the CEC function. When you connect an HDMI CEC
compatible device to your projector with an HDMI cable, turning on the HDMI
CEC compatible device automatically turns on the projector, while turning off the
projector automatically turns off the HDMI CEC compatible device.
• Power On Link
When a device is connected to the projector, turning on the device or the
projector can also turn on each other.
• Power Off Link
When a device is connected to the projector, turning off the device or the
projector can also turn off each other.
Selects a baud rate that is identical with your computer's so that you can connect
the projector using a suitable RS-232 cable and update or download the
projector's firmware. This function is intended for qualified service personnel.
Enables this function to display the grid test pattern, which helps you adjust the
image size and focus so as to check if the projected image is free of distortion.
• Closed Caption Enable
Activates the function by selecting On when the selected input signal carries
closed captions*.
*About caption
An on-screen display of the dialogue, narration, and sound effects of TV programs
and videos that are closed captioned (usually marked as "CC" in TV listings).
• Caption Version
Selects a preferred closed captioning mode. To view captions, select CC1, CC2,
CC3, or CC4 (CC1 displays captions in the primary language in your area).
Selects On to shorten the projector cooling time from a normal 90-second
duration to approximately 3 seconds.