Table of Contents
Advertisement
5.
Slowly pull the lamp out of the projector.
•
Pulling it too quickly may cause the lamp to
break and scatter broken glass in the
projector.
•
Do not place the lamp in locations where
water might splash on it, children can reach
it, or near flammable materials.
•
Do not insert your hands into the projector
after the lamp is removed. If you touch the
optical components inside, it could cause
color unevenness and distortion of the
projected images.
6.
Insert the new lamp into the lamp
compartment and make sure it fits in the
projector.
•
Ensure the connectors are aligned.
•
If you experience resistance, lift the lamp and
start again.
7.
Tighten the screws that secure the lamp.
•
Loose screw may cause a bad connection,
which could result in malfunction.
•
Do not over tighten the screw.
8.
Replace the lamp compartment cover on
the projector and tighten the captive
screw.
9.
Restart the projector.
Do not turn the power on with the lamp cover removed.
Maintenance
59
Advertisement
Table of Contents
