Table of Contents
Advertisement
Transporting the projector
It is recommended that you ship the projector with its original packing or
equivalent.
When you carry the projector yourself, please use the original box or a
suitable soft carry case.
Lamp information
Getting to know the lamp hour
When the projector is in operation, the duration (in hours) of lamp usage is
automatically calculated by the built-in timer. The method of calculating the
equivalent lamp hour is as follows:
See
"Setting Lamp mode as Economic or SmartEco"
information on Economic mode.
To obtain the lamp hour information:
1.
Press MENU/EXIT and then press ◄/► until the SYSTEM SETUP:
Advanced menu is highlighted.
2.
Press ▼ to highlight Lamp Settings and press MODE/ENTER. The
Lamp Settings page displays.
3.
You will see the Equivalent lamp hour information displaying on the
menu.
4.
To leave the menu, press MENU/EXIT.
You can also get the lamp hour information on the INFORMATION menu.
Extending lamp life
The projection lamp is a consumable item. To keep the lamp life as long as
possible, you can do the following settings via the OSD menu.
Setting Lamp mode as Economic or SmartEco
Using Economic mode reduces system noise and power consumption by
15%. Using SmartEco mode reduces system noise and lamp power
consumption by up to 30%. If the Economic or SmartEco mode is
selected, the light output will be reduced and result in darker projected
pictures.
Setting the projector in Economic or SmartEco mode also extends the
lamp operation life. To set Economic or SmartEco mode, go into the
SYSTEM SETUP: Advanced > Lamp Settings > Lamp mode menu
and press ◄/► until your desired mode is selected.
Lamp mode
Normal
Economic
66
Maintenance
Description
100% lamp brightness
Saves 15% lamp power consumption
below for more
Advertisement
Table of Contents
