Installing The Microsd Card - Epson TM-T20II-i Technical Reference Manual

Hide thumbs Also See for TM-T20II-i:
Table of Contents

Advertisement

Installing the microSD Card

Install the microSD card into the microSD card slot on the rear of the product.
Use a microSD card that has wear leveling functions
 The microSD card can only be used if the PHP function is enabled.
 The spooler cannot be used if PHP is enabled.
Installing the microSD Card
1
Open the protective cover on this product. Check the insertion direction of
the microSD card and insert it into the microSD card slot.
2
Close the protective cover.
Removing the microSD Card
1
Open the protective cover on this product and gently push the microSD
card into the slot.
2
When the microSD card is slightly ejected, pull it out carefully.
3
Close the protective cover.
 Insert the microSD card with its metal side facing down.
 Push the microSD card to the bottom until it clicks.
Push the microSD card to the bottom until it clicks.
Chapter 2
Setup
2
35

Advertisement

Table of Contents
loading

Table of Contents