Web Service Settings - Server Access - Direct Print - Epson TM-T20II-i Technical Reference Manual

Web Service Settings - Server Access - Direct Print

You can set server direct print for the TM-T20II-i.
You can use with TM-i firmware Ver.4.3 or later for this product.
Item
Server Direct Print
ID
Password
Server1 to 3 URL
Interval(s)
Authenticate Server
Apply
Chapter 3
Sets whether to use the Server Direct Print function or not.
Select [Enable] or [disable].
Set ID for the server-side program to identify TM-T20II-i when [Server
Direct Print] is set to [Enable].
This ID becomes the user ID used for Digest access authentication.
The set value will also be passed as an ID parameter value for the form
data posted to the server.
Set your password used for Digest access authentication when [Server
Direct Print] is set to [Enable].
Specifies the Web server URL and the application path when [Server
Direct Print] is set to [Enable].
Example: http://[IP address of Web server]/Test_print.php
Click the [Access Test] button to check if the address is accessible.
Set the request interval when [Server Direct Print] is set to [Enable].
Sets whether the server authentication is performed with the registered
certificate when accessed through https.
Saves settings to TM-T20II-i.
Application Development Information
Description
3
101