Figure 7 Load Paper - VeriFone Omni 3600 Installation Manual

CAUTION
Store thermal paper in a dry, dark, cool place. Handle thermal paper carefully;
impact, friction, high temperatures, humidity, light, and oils affect the color and
storage characteristics.
To install the paper roll in the internal thermal printer:
1
Lift paper roll cover tab to unlock the printer door
2
Rotate the printer door up and back. Note that the door is hinged; it is not
necessary to remove it from the unit.
Figure 6
3
Loosen the glued leading edge of the paper from the roll.
4
Hold the paper roll so paper feeds from the bottom
approximately two inches of paper free of the roll.
5
Drop the paper roll into the printer tray, allowing the free paper to extend
outside the printer door
Figure 7
6
Close the cover by gently pressing directly on the paper roll cover tab until it
clicks shut. Allow a small amount of paper to extend outside the cover, as
shown in
Open the Printer Cover
(Figure 7).
Load Paper
Figure 8.
O 3600 T
MNI
Paper Installation
(Figure 6).
(Figure 7) and pull
O 3600 I G
MNI NSTALLATION
ERMINAL
15
UIDE