Light Switches - Volvo XC60 Owner's Manual

INSTRUMENTS AND CONTROLS

Light switches

The headlamp control activates and adjusts the
external lighting. It is also used to adjust display
and instrument lighting and ambience lights
(p. 101).
Overview, light switches.
Thumbwheel for adjusting display and instru-
ment lighting as well as ambience lights*
Button for rear fog lamp
Knob for lighting while driving and parking
Thumbwheel for headlamp levelling
A car with active xenon headlamps* has auto-
matic headlamp levelling and therefore does not
have the thumbwheel for headlamp levelling.
92
Knob positions
NOTE
The same lamps are used for daytime running
lights and front position lamps. The bright-
ness is higher when the lamps are used as
daytime running lights.
Position Specification
Daytime running lights
car's electrical system is in key
position II or the engine is running.
Main beam flash can be used.
Daytime running lights, position
lamps rear and side marker lamps
when the car's electrical system is
in key position II or the engine is
running.
Position lamps/side marker lamps
when the car is parked
Main beam flash can be used.
Position Specification
Daytime running lights, position
lamps rear and side marker lamps
in daylight when the car's electrical
system is in key position II or the
engine is running.
Dipped beam and position lamps/
side marker lamps in weak daylight
or darkness, or when the rear fog
lamp or windscreen wipers with
A
when the
continuous wiping are activated.
The tunnel detection (p. 94)*
function is activated.
The Active main beam (p. 96)*
function can be used.
Main beam can be activated when
dipped beam is switched on.
Main beam flash can be used.
Dipped beam and position lamps/
B
.
side marker lamps.
Main beam can be activated.
Main beam flash can be used.
A Fitted in or under the front bumper.
B Also at idle when the engine is running, provided that the knob
is moved to this position from another position.
Volvo recommends that
when the car is driven.
* Option/accessory, for more information, see Introduction.
mode is used