Lamp Replacement - Headlamps - Volvo XC60 Owner's Manual

Lamp replacement - headlamps

All of the headlamp bulbs are replaced via the
engine compartment. First loosen and remove
the whole headlamp.
Removing the headlamp
Set the car's electrical system in key position 0,
see Key positions - functions at different levels
(p. 83).
Pull out the headlamp's locking pins.
Pull the headlamp straight forward.
IMPORTANT
Do not pull the electrical cable, only the con-
nector.
Detach the headlamp connector by pressing
down the clip with your thumb.
At the same time, guide out the connector
with your other hand.
5. Lift out the headlamp and place it on a soft
surface to avoid scratching the lens.
6. Replace the bulb in question.
Securing the headlamp
MAINTENANCE AND SERVICE
When securing, check that the long lock pin is
engaged - it should be engaged in both eyes.
1. Plug in the connector, a clicking sound
should be heard.
2. Reinstall the headlamp and locking pins.
Check that they are firmly inserted.
3. Check the lighting.
The headlamp must be mounted and the connec-
tor firmly connected before the lighting is
switched on or the remote control key is inserted
into the ignition switch.
Related information
•
Lamp replacement - general (p. 360)
•
Lamp replacement - cover for main/dipped
beam bulbs (p. 362)
•
Lamps - specifications (p. 367)
361