WHEELS AND TYRES
||
3. Lower the car so that the wheels cannot
rotate.
4. Tighten the wheel bolts crosswise. It is
important that the wheel bolts are tightened
properly. Tighten to 140 Nm. Check the tor-
que with a torque wrench.
5. Refit the plastic caps on the wheel bolts.
NOTE
•
After a tyre has been inflated, always refit
the dust cap in order to avoid damage to
the valve from gravel, dirt, etc.
•
Only use plastic dust caps. Metal dust
caps can rust and become difficult to
unscrew.
334
When changing to another tyre
dimension
Contact an authorised Volvo workshop for updat-
ing the software at each change of tyre dimen-
sion. A software download may be necessary
both when changing to larger and smaller dimen-
sions, and also when switching between summer
and winter wheels.
Related information
•
Changing wheels - removing wheels (p. 331)
•
Jack* (p. 335)
•
Warning triangle (p. 334)
•
Wheel bolts (p. 330)
Warning triangle
The warning triangle is used to warn other road
users of a stationary vehicle.
Storage and folding up
* Option/accessory, for more information, see Introduction.