Trip computer - trip statistics*
Trip statistics from the trip computer can be
shown in the centre console's screen and pro-
vide a graphic overview of fuel consumption.
Function
–
Open the menu system MY CAR (p. 118)
and select
Trip statistics
in order to see the
bar chart.
30
Trip statistics
Each bar symbolises 1 km or 10 km driven dis-
tance, depending on the scale selected - the bar
at the far right shows the value for the current kil-
ometre or 10 km.
Using the TUNE control, the scale for the bars
can be changed between 1 km and 10 km - the
cursor on the far right changes position between
up and down in relation to the scale selected.
The figure is schematic - layout may vary depending on car model or updated software.
30
Settings
Different settings can be made for trip statistics
Trip statistics
in the menu system MY CAR -
•
Reset when vehicle has been off for
minimum 4h
- highlight the box by select-
ing ENTER and go back out of the menu by
selecting EXIT. With this option selected, all
statistics are deleted automatically after fin-
ishing driving and the car has been stationary
for more than 4 hours. Trip statistics start
again from zero the next time the engine is
started.
•
Start new trip
- ENTER is used to delete all
previous statistics, go back out of the menu
by selecting EXIT. If a new driving cycle shall
be started before 4 hours have elapsed then
the current period must first be deleted man-
ually with this option.
See also information on Eco guide (p. 72).
Related information
•
Trip computer (p. 119)
INSTRUMENTS AND CONTROLS
.
* Option/accessory, for more information, see Introduction.
127