Volvo XC60 Owner's Manual page 371

IMPORTANT
If the wiper arms in service position have
been folded up from the windscreen, they
must be folded back down onto the wind-
screen before the wipers are activated. This is
to avoid scraping the paint on the bonnet.
Replacing the wiper blades
Fold up the wiper arm when it is in service
position. Press the button located on the
wiper blade mounting and pull straight out
parallel with the wiper arm.
Slide in the new wiper blade until a "click" is
heard.
Check that the blade is firmly installed.
4. Fold the wiper arm back towards the wind-
screen.
The wipers return from service position to their
starting position when you briefly press the
START/STOP ENGINE button to set the car's
electrical system to key position I (or when the
car is started).
MAINTENANCE AND SERVICE
NOTE
The wiper blades are different lengths. The
blade on the driver's side is longer than on
the passenger side.
}}
369