Messages - Handling - Volvo XC60 Owner's Manual

Message Specification
Time for reg- Time for regular service -
ular mainte-
contact a workshop
nance
timing is determined by the
number of kilometres driven,
number of months since the
last service, engine running
time and oil grade.
Maintenance If the service intervals are
not followed then the war-
overdue
ranty does not cover any
damaged parts - contact a
B
workshop .
Transmission
Contact a workshop
Oil change
check the car as soon as
needed
possible.
Transmission The gearbox cannot handle
Reduced per- full capacity. Drive carefully
formance
until the message clears
If shown repeatedly - con-
tact a workshop
Transmission Drive more smoothly or stop
the car in a safe manner.
hot Reduce
Disengage the gear and run
speed
the engine at idling speed
until the message clears
Message
Transmission
B hot Stop
. The
safely Wait for
cooling
Temporarily
A
off
Low battery
charge Power
save mode
B
to
A Part of message, shown together with information on where the
problem has arisen.
B An authorised Volvo workshop is recommended.
C For more information regarding the automatic gearbox, see
Automatic gearbox - Geartronic* (p. 281).
Related information
•
C Messages - handling (p. 117)
.
•
Menu navigation - combined instrument
panel (p. 115)
B .
C
.
Specification
Critical fault. Stop the car
immediately in a safe man-
ner and contact a work-
B
shop .
A function has been tempo-
rarily switched off and is
reset automatically while
driving or after starting
again.
The audio system is
switched off to save energy.
Charge the battery.
INSTRUMENTS AND CONTROLS

Messages - handling

Use the left-hand stalk switch to acknowledge
and browse among messages (p. 116) that are
shown in the information display of the com-
bined instrument panel.
When a warning, information or indicator symbol
illuminates, a corresponding message appears in
the display at the same time. An error message is
stored in a memory list until the fault has been
rectified.
Press OK on the left-hand stalk switch to
acknowledge a message. Scroll through mes-
sages with the thumbwheel (p. 115).
NOTE
If a warning message appears while you are
using the trip computer, the message must be
read (press OK) before the previous activity
can be resumed.
Related information
•
Menu overview - combined instrument panel
(p. 116)
* Option/accessory, for more information, see Introduction.
117