Lamp Replacement - Cover For Main Dipped Beam Bulbs - Volvo XC60 Owner's Manual

MAINTENANCE AND SERVICE
Lamp replacement - cover for main/
dipped beam bulbs
Main/dipped beam bulbs are accessed by
releasing the headlamp's larger cover.
Before starting to replace a bulb, see Lamp
replacement - headlamps (p. 361).
1. Unscrew the cover's four screws using a Torx
tool, size T20 (1). They should not be loos-
ened completely. (3 - 4 turns are sufficient.)
2. Slide the cover to one side.
3. Remove the cover.
Reinstall the cover in reverse order.
Related information
•
Lamp replacement - headlamps (p. 361)
•
Lamp replacement - dipped beam (p. 362)
•
Lamp replacement - main beam (p. 363)
362
•
Lamp replacement - extra main beam
(p. 364)
Lamp replacement - dipped beam
The dipped beam bulb is fitted inside the head-
lamp's larger cover.
NOTE
Applies to cars with halogen headlamps.
1. Detach the headlamp (p. 361).
2. Remove the cover (p. 362).
3. Unplug the connector from the bulb.
4. Detach the bulb by pressing the holder
downwards.
5. Fit the new bulb in the socket and snap it in.
It can only be secured in one position.
Reinstall the parts in reverse order.