Setting The Clock - Magnadyne RV5090 Operation And Installation Manual

Setting the Clock

4. Press the VOLUME knob and the Minute
indicators will start flashing.
5. Rotate the VOLUME knob until the correct
Minutes appears in the display. Wait 5 seconds
and the colon between the hours and the minutes
will start flashing indicating the clock is set.
Sleep Timer Operation
Setting the Sleep Timer:
1. Press the SLP button and "SLEEP 10" appears
in the display.
2. Keep pressing the SLP button again until the
desired sleep time appears in the display
(0, 10, 20, 30, 40, 50, 60, 70, 80 minutes).
3. Wait 5 seconds and the display will return to
normal operation and "SLEEP" will appear in
the display.
4. After the designated sleep timer has expired
the unit will turn off automatically.
Cancelling the Sleep Timer:
1. Press the SLP button until "0" is displayed.
2. Wait 5 seconds and the display will return to
normal operation.
(Continued)
9