Alarm Operation - Magnadyne RV5090 Operation And Installation Manual

Alarm Operation

Setting the Alarm Timer:
1. Press the ALM button and the clock
will appear in the display with the Hour
number flashing.
2. Rotate the VOLUME knob until the correct Hour
appears in the display. "ALARM" will appear in
the display indicating the alarm is activated.
Note 1: When setting the alarm clock make
sure to select the correct AM or PM indicator.
Note 2: When setting the alarm DO NOT use
12:00 AM, because that time is used to cancel
the alarm.
3. Press the VOLUME knob and the Minute
indicators will start flashing.
4. Rotate the VOLUME knob until the correct
Minutes appears in the display. Wait 5 seconds
and the colon between the hours and the
minutes will start flashing. "ALARM" will
appear in the display indicating the alarm is set.
5. Press the POWER button to turn the unit off.
The unit will automatically turn on when the
set alarm time is reached.
Cancelling the Alarm Timer:
Follow the procedures above except set the
alarm time to "A AM 12:00". "ALARM" will
disappear in the display indicating the alarm
has been cancelled.
10