Magnadyne M9999 Installation And Operation Manual

Am / fm / wb / aux / cd / cd changer controller and cassette stereo receiver

Advertisement

R
Installation
and Operations
Manual
M9999
AM / FM / WB / AUX / CD / CD Changer Controller
and Cassette Stereo Receiver

Advertisement

Table of Contents
loading

Summary of Contents for Magnadyne M9999

  • Page 1 Installation and Operations Manual M9999 AM / FM / WB / AUX / CD / CD Changer Controller and Cassette Stereo Receiver...
  • Page 2 Introduction Your new in-dash entertainment system has been designed for many years of listening pleasure. Take a moment to read through this manual and become familiar with the operations and features of this out- standing product. It is advisable to keep this manual in your vehicle ready for reference. We hope the experience with your new mobile entertainment system is a pleasurable one.
  • Page 3 Location and Function of Controls at a Glance in the optional CD changer. 8. Recall Button #5: Press when programming a radio station into memory #5 (CH5). Press when recall- ing memorized radio station #5. Press to play the disc that follows the one that is currently playing in the optional CD changer.
  • Page 4: Listening To The Radio

    Listening to the Radio 1. Push the “LEVEL” knob (2) once to turn the unit on. (Figure A) 2. Press the “BAND” button (12) to select a radio band: FM1, FM2, FM3, AM1 or AM2. 3. To manually tune in a radio station, rotate the “Tuning”...
  • Page 5: Cassette Tape Operation

    Weather Band Radio Operation 1. Press the “W.BAND” button (9) to activate the weather band radio. (The weather band radio will then take priority over the AM/FM Radio or CD). The weather band radio will search for the strongest radio signal in your area (Figure D). 2.
  • Page 6: Cd Changer Control (Optional)

    DOWN” (7) or “DISC UP” (8) buttons to scroll through your selection of CD’s in the CD chang- er. If a CD is not in a tray in the changer, the M9999 will continue to scroll through the trays until one is found. Figure H...
  • Page 7: Auxiliary Input

    1. Press the “MODE” (13) button until the display reads “AUX” which indicates that the auxiliary unit is playing through the M9999 (Figure M). 2. All tonal features (Volume, Bass, Treble, Balance and Fader) are active when the auxiliary source is playing.
  • Page 8: Setting The Clock

    Setting the Clock Setting the Clock: To set the clock perform the following procedure: 1. Press the “Level” knob (2) to turn the unit on. 2. Press and hold the “Clock” button (11) (Figure Q) until the display begins to flash (Figure R). 3.
  • Page 9: Installation Procedure

    Installation Procedure Step 1: The radio chassis is designed to be “Sleeve Mounted” through a opening in the dashboard panel. The required opening size is 182mm (7-3/16") x 84mm (3-5/16"). Cut or enlarged an opening in the dashboard to accommodate the mounting sleeve. Step 2: If you are replacing an existing factory installed radio, an adapter harness might be avail-...
  • Page 10: Installation

    Installation Speaker Connection Purple Wire: Rear Right Speaker (+) Purple/Black Wire: Rear Right Speaker (-) Gray/Black Wire: Front Right Speaker (-) Gray Wire: Front Right Speaker (+) Green Wire: Rear Left Speaker (+) Green/Black Wire: Rear Left Speaker (-) White/Black Wire: Front Left Speaker (-) White Wire: Front Left Speaker (+) Black Wire: Ground Blue Wire: Power Antenna...
  • Page 11: Auxiliary Connection

    Auxiliary Connection M9999 Red (Right) White (Left) Audio Out from VCR / TV / Video Game or Satellite Receiver CD Changer Connection M9999 Black Remote IR Sensor Connection (Optional) M9999 Video Game Satellite Receiver CD Changer Male/Male (Supplied with CD Changer)
  • Page 12: One (1) Year Limited Warranty

    Warranty ONE (1) YEAR LIMITED WARRANTY Magnadyne Corporation or its authorized agents will within one year from the date of sale to you, repair, replace or refund the retail sales price of said product or any part thereof, at the...

Table of Contents