Table of Contents
Advertisement
Bluetooth Operation
Pairing Bluetooth Devices:
1. Press the BT button. "BT A2DP" appears in
the display.
2. Open the mobile device's setup menu.
3. Open the Bluetooth settings program on the
mobile device and activate the Bluetooth feature.
4. From your mobile device scan for available devices.
5. Select "WALL MOUNT RECEIVER" to connect to
the unit. The "•" indicator next to the
quickly during pairing.
Note: If the mobile device requires a password
enter "0000" as the password.
6. When mobile device has been paired the "•"
will be illuminted continuously. When the unit is
streaming music the "•" indicator next to the
will flashes every 5 seconds.
Note 1: If the Bluetooth mobile device is already
paired with the entertainment center, select "WALL
MOUNT RECEIVER" on your phone and touch
"Connect".
Note 2: To select the Bluetooth mode using the remote
control, press the MODE button until "BT A2DP"
appears in the display.
Bluetooth Operation:
Play/Pause Button: Press the
Bluetooth playback. Press again to resume playback.
Note: The RV5090 display will not show the playback
is pause. The mobile device will show that the
playback is paused.
Changing the Track:
Press the
button to select a higher track.
Press the
button to select a lower track.
Sound Controls: Use the sound controls on the
RV5090 to adjust the volume and sound quality.
Note: For optimum sound quality make sure the
media volume on the device is set at 75% or greater.
will flash
button to pause the
Bluetooth
Indicator
Bluetooth Indicator "•" next to
• is off = RV5090 is not in Bluetooth mode.
• is flashing quickly = RV5090 is trying
to pair with the device.
• is on solid = RV5090 is paired with the
device but music is not streaming.
• flahes every 5 seconds = RV5090 is
streaming music.
logo
21
Hide quick links:
Advertisement
Table of Contents
