Setting The Clock - Magnadyne M9900-1 Installation And Operation Manual

Setting the Clock

Setting the Clock:
To set the clock perform the following procedure:
1. Press the "Level" knob (2) to turn the unit on.
2. Press and hold the "Clock" button (11) (Figure Q)
until the display begins to flash (Figure R).
3. Use the "Clock Setting" knob (3) to adjust the
hours (When selecting hours note the AM or PM
indicator) and minutes as indicated on the con-
trol. Rotate the knob left to adjust minutes and
rotate right to adjust hours.
Note: The clock is a 12 hour clock with AM and
PM settings. When setting the clock check the
display for the correct time setting AM or PM.
8
Figure Q (Clock Button)
Figure R (Flashing Display)
Hours
Figure S (Adjusting Minutes/Hours)
Minutes