General Operations; Power On/Off; Selecting A Play Source; Dimming The Display - Magnadyne Linear Series Operation & Installation Manual

Button Locations and Functions (continued)
23. 2 / INT: Short press to recall radio preset or to
turn Intro ON/OFF in DISC/USB mode.
Long press to memorize a radio station.
Seek Down: Press to tune the radio to a
24.
lower frequency or to navigate to previous track
in USB, Disc or Bluetooth mode .25. 2 / INT:
Short press to recall radio preset or to turn
Intro ON/OFF in DISC/USB mode.
Long press to memorize a radio station.
25. Play, Pause: Short press to recall radio
preset. Long press to memorize a radio station .
Press to pause in DISC/USB/BT modes, press
again to restore playback. Long press to show
software version in AUX mode.
RV6100 General Operations

Power On/Off:

Press the button to turn the unit On. When
the unit is on, a short press will mute all audio.
Press and hold to turn the unit off.

Selecting a Play Source:

Press the corresponding button on the unit
to directly select AM/FM, DISC, AUX, USB or
BLUETOOTH play sources.

Dimming the Display:

Short press the DIM button to select from the
4 levels of brightness for the display area:
DIM LOW, DIM MID, DIM HIGH, off.

Display Selection:

Press the DISP button to display the clock.
Press again to return to previous display.
Press and hold to perform clock setting func-
tions (See "Setting the Clock" for more details).

Selecting Speaker Sets:

Note: See Sound Controls for detailed volume
and mute control operations.

Setting the Clock:

1. Press the DISP button until the clock appears
in the display.
2. Press and hold the DISP button until the
Hours number starts flashing.
3. Press the + or - buttons to set to the desired
hour displayed on the unit's screen.
Note: When setting the clock, make sure to select
the correct AM or PM.
4. Press the DISP button and the Minute
indicators will start flashing.
4
26. EQ: Short press to toggle between EQ presets:
FLAT-POP-ROCK-CLAS or EQ OFF. Long press
to turn LOUD ON/OFF.
27. USB Music: Music media USB port.
28 Reset: Press to reset unit to default settings.
29. B Speaker Selection: Short press to control
B speakers volume. Long press all speakers
on/off.
30. IR Sensor: Remote control sensor.
31. A Speaker Selection: Short press to control
A speakers volume. Long press all speakers
on/off.
5. Press the + or - buttons to set to the desired
minutes displayed on the unit's screen. When
finished, press the DISP button and the time
will be set.

Setting the Alarm Timer:

1. Short press the ALARM button to toggle
between either ALARM ON or ALARM OFF.
2. To set the alarm time, press and hold the ALARM
button. The hour will flash and then can be
adjusted and set using the + and - buttons.
To adjust the minutes, press and hold the
ALARM button until the minutes flash and then
can be adjusted and set by again pressing the +
and - buttons to the desired time.
3. With the alarm set, "ALARM" will appear in the
display. When the set alarm time is reached, a
beep sound will be heard and will continue until
any radio button is pushed.
4. When the alarm time is set and the unit is off,
the unit will automatically turn on to sound
the alarm beep when the scheduled time is
reached.
Setting the Sleep Timer:
1. Press the SLEEP button to toggle between
SLEEP ON and SLEEP OFF.
2. With SLEEP ON selected, press the + or -
buttons to set desired sleep time up to 60
minutes.
3. Wait 5 seconds and the display will return to
normal operation and "SLEEP" will appear in
the display.
4. After the designated sleep timer has expired the
unit will turn off automatically.