Cassette Tape Operation - Magnadyne M9999 Installation And Operation Manual

Am / fm / wb / aux / cd / cd changer controller and cassette stereo receiver
Table of Contents

Advertisement

Weather Band Radio Operation
1. Press the "W.BAND" button (9) to activate the
weather band radio. (The weather band radio will
then take priority over the AM/FM Radio or CD). The
weather band radio will search for the strongest
radio signal in your area (Figure D).
2. To scan all 7 weather band stations, press the
"Scan" button (3)
3. Press the "W.BAND" button once again to turn off
the weather band radio.

Cassette Tape Operation

1. Insert a cassette tape into the tape slot (19). The
tape can only be inserted in one direction (thick
end to the right side) Do not force the tape into
the slot.
2. The cassette tape indicator will show the side of
the tape that is playing.
and
indicates "SIde B" (Figure E).
3. Allowing the tape to play until it's end will acti-
vate the "Auto Reverse" function. The tape will
automatically change directions and the remain-
ing side of the tape will play. To perform this
function manually, press the "REW and FF" but-
ton at the same time. The
will change position.
4. To "Advance Forward" or "Rewind" the tape,
press-in the "REW" button or the "FF" button
(20) until it locks. To release the button, lightly
press on the opposite button.
5. To eject the tape, press the "Eject" button (18) all
the way in until the tape pops out (Figure F).
Cassette Player Maintenance and Precautions
Periodic cleaning of the tape head and drive mechanism is required to maintain reliable performance. A qual-
ity head and mechanism cleaning system can be purchased at any music store or electronics store and
should be used regularly to maintain the performance and life of the tape mechanism and heads. (Follow
manufactures recommendations for use and frequency of use)
1. Avoid using C-120 length tape in this mechanism.
2. All time lengths up to C-90 are acceptable.
3. Check tape case before inserting the tape into
the cassette slot (19).
4. Take up any slack on the tape by using a pencil
in the hub to tighten the tape (Figure G).
indicates "Side A"
and
indicators
Loose Tape
Figure D
Figure E
Figure F
Figure G
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents