Monitoring Scanning - Oce 31x5e User Manual

Monitoring scanning

he Printer monitor keeps you informed of all activities on the Océ 31x5E
T
(copying, printing, mailbox printing or scanning). You will also be informed of
any problems which occur during one of these activities.
The current job section of the job control window shows information about the
current job. It can be very useful to find out which file names will be used for
a scan job. This file name will be visible as long as scanning continues (which
might be a short amount of time if the jobs are small).
Opening the job control window
Click the Start menu button, click 'Programs', then click 'Océ', then 'Print
1
Logic' and finally click 'Job control'.
If a dialog appears with a list of printers, select the required printer(s) from the
2
list.
Click OK.
3
You can also select this option from the Tools menu of the Available
Note:
printers window, or by double-clicking the Job monitor or Printer monitor.
Opening the printer monitor
Click the Start menu button, click 'Programs', then click 'Océ', then 'Print
1
Logic' and finally click 'Printer monitor'.
If a dialog appears with a list of printers, select the required printer(s) from the
2
list.
Click OK.
3
You can also start the Printer monitor by selecting the printer(s) in the
Note:
Available printers window and then selecting 'Printer monitor' from the Tools
menu or the menu available by clicking on the right mouse button.
The Printer monitor will be opened, showing the activities of one or more
printers. Each time there is a problem, you will be notified (as long as the
Printer monitor is active).
Monitoring job progress 33