Removing Scanned Jobs - Oce 31x5e User Manual

Removing scanned jobs

You may want to remove scan jobs which you have finished scanning. Whether
you can still remove the job in question, depends on the status of the job in
progress (see figure 10):
Jobs that you have finished scanning, but that are still waiting in the set
memory for transport to the DAC, can be removed. The display shows the
number of waiting jobs (max. 15).
Jobs that have arrived at the DAC or have already been transferred from the
DAC to the server cannot be stopped. These files can only be deleted from
the server.
Paper
original
Scanning
[10] The scanning process
Please be aware that you cannot remove a specific scan job. You can only
remove all finished scan jobs in the set memory. If you want to remove selected
jobs only, wait for the jobs to arrive on the server.
The current job (if any) that you are still scanning and that you have not
Note:
yet finished, will remain in the set memory.
Removing finished scan jobs from the set memory
Press the red stop button '
1
Press the start button (
2
Scan jobs
Into set
memory
'.
) to confirm (or press 'C'to cancel).
To
To
Server
DAC
29