Chapter 1 - Installing the KSUs
Location of Short-Term Battery Box
Remove screws to install
1.6.1.1
Installing the Short-Term Battery Box in the 19" KSU-A
1.
2.
3.
4.
5.
6.
1 - 18
Figure 1-17:
Make sure the KSU is powered off and unpluged.
On the back of the 19" KSU-A, remove the 2 screws holding in the metal plate on the left side
of the KSU.
Remove the screw holding in the fan's metal plate. Remove the cover by lifting it on the left
side and sliding it slightly to the right.
●
Use caution when removing the plate as the fan is attached to this plate but it is still
plugged into the connection on the KSU.
Install the metal wire guide/protector by inserting it to the left of the fan's position. Secure it to
the KSU with the provided screw.
On the battery box cage, remove the screws holding down the 2 brackets on the top of the
box.
Install the 2 battery units into the battery box cage. and reattach the 2 brackets to secure the
batteries in place.
REMOVE SCREWS ON 19" KSU-A
Chapter 1